Steel DropDeck w/ Wood Flooring

w

 

Specifications

 

1.       3/16” Thick Lower Main Beams w/ 3” Camber Arch

2.       1/4" Thick Upper Beams w/ No Camber

3.       1 1/8” – 1 1/2" Ship Lapped Apitong or Brazilian Hard Wood Flooring

4.       6” x 8.2# Structural Steel Side Rails Upper and Lower Decks

5.       3/8” Steel Rub Rails, Stake Pockets & Pipe Spools Upper And Lower Decks

6.       3/8” Approach Ramp (5th Wheel Plate)

7.       King Pin Set @ 18”– 36”

8.       4” x 3.25# Steel Jr. I-Beams Set @ 14”-16”

9.       Binkley/Holland 60,000 lb 28” Landing Gear

10.    Rear Impact Guard Welded To Rear Of Trailer

11.    5” Diameter x 0.625” Wall 25,000 lb Axles With Slack Adjusters

12.    WSI House Brand Radials (See Options For Others)

13.    Dump Valve On Back Axle Wired To Auxiliary Plug (Spread Axle)

14.    Paint: Black Standard (others available)

15.    ABS: WABCO 2S/1M Anti-Lock Braking System

16.    Sealed 12 Volt 7 Way Harness w/ Center Turn Signal

17.    5 Running Lights Along Each Side Of Trailer

18.    1 Set Of Wade Mud Flaps

19.    DOT Tape Along Sides and Rear Of Trailer

 

 

Options

 

1.       Stainless Steel Package (All Rear Light Plates)

2.       Aluminum 10 Hole Hub Piloted Wheels

3.       4” Sliding Strap Winches

4.       Aluminum Toolboxes (Various Sizes)

5.       Tire Carrier (Located Under Front Deck)

6.       Stainless Steel Mud Flap Weights

7.       Ridewell Air Ride Suspensions or Hutchens Spring Ride Various Configurations (California Legal Available)

8.       Lift Axles Available

9.       GoodYear Radials Available

10.    In Floor KineDyne Chain Tie Downs

11.    5/8” Dia D-Ring Tie Downs

12.    6 5/8” OR 8 5/8” Tail Roller

 

 

Copyright © 2007 Wade Services Incorporated. All rights reserved.