|
|
|
|||
|
Aluminum Combo DropDeck
w/ Aluminum Flooring |
||||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
Specifications 1.
3/16”
Thick 2.
1/4"
Thick Upper Beams w/ No Camber 3.
1
1/8 Thick Formed Aluminum Flooring 4.
6”
Formed Aluminum Side Rails Upper and Lower Decks 5.
3/8”
Aluminum Rub Rails, Stake Pockets & Pipe Spools Upper And Lower Decks 6.
3/8”
Steel Approach Ramp (5th Wheel Plate) 7.
King
Pin Set @ 18”– 36” 8.
4”
x 3.25# Steel Jr. I-Beams Set @ 14”-16” 9.
Binkley/Holland
60,000 lb 28” Landing Gear 10.
Rear
Impact Guard Welded To Rear Of Trailer 11.
5”
Diameter x 0.625” Wall 25,000 lb Axles With Slack Adjusters 12.
WSI
House Brand Radials (See Options For Others) 13.
Dump
Valve On Back Axle Wired To Auxiliary Plug (Spread Axle) 14.
Paint:
Black Standard (others available) 15.
ABS:
WABCO 2S/1M Anti-Lock Braking System 16.
Sealed
12 Volt 7 Way Harness w/ Center Turn Signal 17.
5
Running Lights Along Each Side Of Trailer 18.
1
Set Of Wade Mud Flaps (2 Sets For Spread Axle) 19.
DOT
Tape Along Sides and Rear Of Trailer |
Options 1.
Stainless
Steel Package (All Rear Light Plates) 2.
Aluminum
10 Hole Hub Piloted Wheels 3.
4”
Sliding Strap Winches 4.
Aluminum
Toolboxes (Various Sizes) 5.
Tire
Carrier (Located Under Front Deck) 6.
Stainless
Steel Mud Flap Weights 7.
Ridewell Air Ride Suspensions or Hutchens Spring Ride Various
Configurations ( 8.
Lift
Axles Available 9.
GoodYear Radials Available 10.
In
Floor KineDyne Chain Tie |
|||
|
Copyright © 2007 Wade Services Incorporated. All rights
reserved. |
||||
